Get Current Module Settings - ICP DAS USA I-2533CS-FD User Manual

4.3.2.

Get Current Module Settings

After successfully connect with the module, the current settings of module will be
listed on "Current Settings" frame.
[Current Settings]
"Firmware Version": Firmware version of the I-2533CS-FD module.
"Group ID":
"CAN baud rate setting":
"Arbitration bit rate":
"Data phase bit rate":
I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Group ID setting of the I-2533CS-FD module.
Current CAN baudrate setting that the I-2533CS-FD
module used.
Current CAN/CAN FD arbitration phase bit rate the
I-2533CS-FD module used.
Current CAN FD data phase bit rate the I-2533CS-FD
module used.
Page: 30