ICP DAS USA I-2533CS-FD User Manual page 20

Hide thumbs Also See for I-2533CS-FD:

Table of Contents

The following DIP switch statuses present the "Module Group ID" value.

10-pin dip switch

The following "Module Group ID" values of device A and B present these ID are in the

same group which can communicate with each other.

Items

For example, there are three CAN networks, Network A, Network B and Network C, and

each of them uses one I-2533CS-FD. The Group IDs of the I-2533CS-FDs are 1, 2, and

3 respectively. The Network A can exchange the data with Network C because the

Group IDs of the I-2533CS-FDs are in the same group (the second rule in the above

table). The Network B can exchange the data with Network C, which follows the third

rule in the above table. The Network A can't connect with the Network B because these

two I-2533CS-FDs are not in the same group.

I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)

Table 2-7-1 Group ID Description

■ : ON

□ : OFF

Table 2-7-2 Group of "Module Group ID"

Device A Group ID value

Switch

Function

Module's

8 ~ 9

group ID

Device B Group ID value

01 or 02 or 03

Description

Group ID

value

□ □

■ □

□ ■

■ ■

01 or 03

02 or 03

Page: 20

Table of Contents