Pin Assignment - ICP DAS USA I-2533CS-FD User Manual

2.3. Pin Assignment

The pin assignments of USB, CAN port, fiber port and power connector of
I-2533CS-FD is shown in the following tables.
Port Name
USB USB
CAN CAN_L
CAN_H
CAN_GND CAN_Ground, ground voltage level of CAN port.
Fiber TxD
RxD
Power +Vs
GND
F.G.
I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Table 2-3-1 Pin Assignment
Description
Used for configuration utility
CAN_Low, signal line of CAN port.
CAN_High, signal line of CAN port.
Transmit optic data.
Receive optic data.
Voltage Source Input. +10V
Power Ground.
Frame Ground.
~ +30V .
DC DC
Page: 12