ICP DAS USA I-2533CS-FD User Manual page 35

Hide thumbs Also See for I-2533CS-FD:

Table of Contents

[Standard ID/Extended ID] block:

Standard ID Filter

"CAN ID (HEX)" block:

Press the "Add" button to add a range of standard/extended CAN ID into

"Standard/Extended ID Fiter" frame.

<1>

"Get CAN Standard IDs/Get CAN Extended IDs" button:

Get all the CAN Standard/Extended IDs setting from the module.

<2>

"Set CAN Standard IDs/Set CAN Extended IDs" button:

Set the CAN Standard/Extended IDs setting on "Standard/Extended ID Fiter"

frame into the module.

<3>

"Re-Init CAN" button:

All settings in the "CAN Filter Setting" will take effect after pressing "Re-Init CAN"

button.

<4>

"Save File" button:

Save the CAN Standard/Extended IDs setting on "Standard/Extended ID Fiter"

frame into an ini file.

<5>

"Load File" button:

Load the CAN Standard/Extended IDs setting from a selected ini file to

"Standard/Extended ID Fiter" frame.

<6>

"Delete Row" button:

Delete a selected row CAN ID from "Standard/Extended ID Fiter" frame.

<7>

"Clear Table" button:

Delete all CAN IDs from "Standard/Extended ID Fiter" frame.

I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)

Extandard ID Filter

Page: 35

Table of Contents