ICP DAS USA I-2533CS-FD User Manual page 39

Step 10: Press the "Firmware Update" button to update the firmware. After successfully
to update the firmware, the "Firmware Update Success! Please Reboot Module!"
information will be display on the "3. Firmware Update" frame.
Step 11: Set the 10-pin dip switch to the necessary position and reboot the
module.Then press the "Exit" button to exit.
I-2533CS-FD ( CAN/CAN FD to Single-mode Fiber Bridge ) User Manual (version 1.1.0)
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Page: 39