Introduction - ICP DAS USA I-2533CS Series User Manual

Hide thumbs Also See for I-2533CS Series:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

1. Introduction

The I-2533CS series (I-2533CS, I-2533CS-60, I-2533CS-A and I-2533CS-B) is a

local CAN bridge used to establish a connection between two CAN bus system via

single mode fiber optic transmission medium. In order to solve the problem between

CAN and fiber transmission medium, The I-2533CS series is specially designed for

converting the electrical CAN bus signal to fiber optic cables. Besides, I-2533CS series

has three more important features.

First, the transmission distance limitation of the CAN bus system will not affected

due to the different CAN baud rate. It means that the total CAN bus working distance

can be extended. Second, the bus error on one CAN network will not affect the

operation of another CAN network. Finally, the two CAN network can communication

with each other by using different CAN baud rate for highly flexibility.

The mainly difference between I-2533 and I-2533CS series are fiber connectors

and transmission distance. The I-2533CS series is designed for single mode fiber, and

allow to extern CAN bus to maximum 30 km. Besides, I-2533CS provides the group

function, which is the basic message router. Users can decide the CAN message flows

between several CAN bus systems. I-2533CS series also provides the utility tool for

user-defined baud rate and filter configuration. By using this tool, it is allowed to have

user-defined baud rate and CAN message filter. When users use the I-2533CS series

on two CAN network with different CAN baud rate, it may be useful to reduce the bus

loading of the network which has low baud rate.

I-2533CS series CAN to Single Mode Fiber Bridge User Manual (version 1.0.0)

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Page:

Table of Contents

I-2533csI-2533cs-60 I-2533cs-a I-2533cs-b