Table of Contents
Advertisement
01 – fire
02 – help
03 – panic
00 – all buttons above
Y
– enable/disable emergency button:
0 – disable emergency button
1 – enable emergency button:
o 1 – output 1
o 2 – output 2
o 3 – output 3
After service command confirmation, there will be digits displayed which represent outputs
activated by emergency button. Use digits 1-3 to change this setting.
Functions which configure all three buttons, will not change the outputs setting.
Example:
a) enabling all emergency buttons:
b) enabling "panic" (burglary) function (
output 3 state:
4.4. TEXT MESSAGES CONFIGURATION
In order for installer to be able to configure text messages, administrator has to grant him
necessary permission first. This can be achieved by typing in following code:
<administrator code>
Next, installer's access to text messages can be changed by pressing the
toggle led 1. When the led is active, installer is granted the access, when led is inactive,
installer is refused access to text messages. Choice of installer's permissions can be
accepted by pressing the
CPX200NWB can store up to 10 phone numbers and up to 32 text messages. If, for any
reason, the SMS can not be send at the moment, it will be send as soon as the connection
with the GSM network is re-established but not later than 1 day after the occurrence of the
event triggering SMS send request (text messages get expired and are deleted). Message
should contain only characters from English alphabet. Furthermore, if the text contains any
spaces, content of the message, starting from the equation mark (=) till the end of the
message, should be enclosed in quotes (" ").
CPX200NWB ALARM CONTROL UNIT – INSTALLER MANUAL
.
button.
held) and changing output 2 and
key. This will
35 / 118
Advertisement
Table of Contents
