Outputs - EBS CPX200NWB Installation And Programming Manual

6.3.4.

Outputs

6.3.4.1. Outputs 1 / 2 / 3
Types of outputs:
 Unused – Output is inactive.
 Alarm – Output is activated when alarm is detected.
 Standby indicator – Output is activated when any of the assigned partitions is
armed.
 Power supply fault – Output is activated when power supply fault is detected.
 Communication loss – Output is activated when information transmission to
server is not possible.
 GSM jamming indicator – Output is activated when jamming GSM.
 Chirp – The output is activated when arming (1 chirp) or disarming (2 chirps).
The minimum duration of the chirp signal possible to set from the configurator is
40ms. In the case of set time for exit chirp is generated after arming, similarly in
the case of the time for entry chirp is generated after disarming.
 Alarm & chirp – The output is activated when alarm is detected or when
arming/disarming.
CPX200NWB ALARM CONTROL UNIT – INSTALLER MANUAL 68 / 118