EBS CPX200NWB Installation And Programming Manual page 112

Alarm control unit
Table of Contents

Advertisement

9.1.4.3. CPSETPARTITIONS
Format:
Limitations:
Description
CPX200NWB ALARM CONTROL UNIT – INSTALLER MANUAL
CPSETPARTITIONS=[STAY,]partitions[,password]
You must know the administrator or user password. Can be executed by
ATS, administrator or user. If the command comes from ATS and was not
authorized with a code, enter the password.
Arms the specified partitions. Partitions a bit-vector indicating which
partition one wants to arm. Bit 0 is the partition 1 , bit 1 is the partition 2.
Bit setting means that one wants to arm the partition. Sending a command
with the partition argument equal to zero, has no sense, since it does not
change anything – if the partitions is 0, the user's password is not checked
and the status returned by the command is equal to EOK. Password is the
code of the user who performs arming. The specified partitions will be
armed from the user's id to which the code belongs. STAY statement
before the partitions vector is optional. It means that partitions in the bit-
vector will be armed in stay mode. It is not allowed to change arm mode
of an already armed partition – system will reject an attempt of arming in
stay mode the partition that is armed in away mode. It will also reject an
attempt of arming in away mode a partition that is armed in stay mode. It
is also not possible to arm in stay mode the partition that has no perimeter
zones assigned.
The command returns:
CPSETPARTITIONS=[STAY,]partitionList: EOK
If the command is executed.
been armed (note that
user does not have permissions to desired partitions).
CPSETPARTITIONS=[STAY,]partitions:ENOT_ALLOWED
If an attempt to change the arm mode of the armed partition was made or
if at least one of the partitions does not have any perimeter zones
assigned to it.
CPSETPARTITIONS=[STAY,]partitions,password:EFORMAT
If the data format is incorrect (partitions,password are the command
arguments)
CPSETPARTITIONS=[STAY,]partitions:EPERMISIONS
If the user with the specified password does not exist
partitionList
is the list of partitions which has
partitionList
may be different from
partitions
, if the
112 / 118

Advertisement

Table of Contents
loading

Table of Contents