EBS CPX200NWB Installation And Programming Manual page 62

6.3.1.5. Delay
The parameter is active for delayed and perimeter exit zones only. It defines a time
from the zone disruption was detected after which an alarm is generated.
6.3.1.6. Alarm after time for exit
Enabling this option causes the panel immediately generates an alarm when the zone
was violated when the system is armed.
6.3.1.7. Ignore during arming
Zone can be violated during partition arming (e.g. delay circuits shall be set to that
option).
CPX200NWB ALARM CONTROL UNIT – INSTALLER MANUAL 62 / 118