Table of Contents
Advertisement
Overview
This user guide is suitable for the following models:
BC-7-4K20S-S3MNB/W (FHD, White)
BC-7-4K20S-S3MNB/B (FHD, Black)
BC-7-4K20S-S6MNB/W (4K, White)
BC-7-4K20S-S6MNB/B (4K, Black)
BC-7-4K20S-LS-4K (FHD-4K Upgrade License)
Features
•
1/2.5 Inch CMOS sensor, Effective pixel number: 8.51 Megapixels
•
Resolution: Up to 2160P29.97, 1080P59.94, 1080i59.94;
•
IP Resolution: Up to 2160P30, 1080P60
•
Zoom: Optical Zoom 20X, Up to 30X in 4K and 40X in Full HD with SRZ (Super Resolution Zoom)
feature
•
Black Level, Color Matrix, Image stabilizer(20X) and true WDR 130dB
•
Video Output: HDMI (4K), 6G-SDI, IP (4K), CVBS simultaneously
•
True Dual Output PTZ camera provides simultaneous 3G-SDI + IP.
•
HDBaseT interface provides One Cable Solution, a single Cat 5e/6 cable carries uncompressed 4K
video, audio, RS232/422 control and IR control, 4K IP video streaming and IP control, power(POH)
for running distance up to 80-100 meters.
•
± 175-degree continuous pan, -30° ~ +90° -degree continuous tilt
•
128 presets, Speed up to 150 degrees/sec
•
Standard mounting and ceiling mounting with E-Flip function
•
Control supports RS-232 control, RS-422/485 control, VISCA-over-IP, IP-Onvif, IR Remote
Controller
•
Presets store camera directions and image parameters (Up to 6 presets on remote controller or
128 presets via protocol programming)
•
Image parameter setting restore with presets and quick access operation
•
IP Protocol RTSP, RTMP for online video streaming
•
Genlock for external synchronization.
•
Local storage Micro SD card up to 32GB supported
•
Supports Audio input, Audio output with IP streaming
•
Power: DC 12V, PoE (IEEE802.3at), POH (Power Over HDBaseT)
•
Firmware upgrade via USB2.0 or IP
•
License upgradable from FHD to 4K
8
Advertisement
Table of Contents
