Detail Menu - Bolin Technology BC-7 Series User Manual

NOTE: When you select the OPW (One Push White Balance)
Perform the following operations:
1. Place an image of white subject (For example: A piece
of white paper) in the center of the screen.
2. Press the HOME button of the infrared remote controller.
The one-push white balance adjustment is activated.
ATW (Auto Tracking White Balance): Auto Tracking White balance (2000K to 10000K), allows the
camera to adjust the tone according to the temperature of the light source illuminating the subject
USER: This is a mode that enables you to manually set the
control of R and B gain up to 256 steps.
NOTE: When you select USER, R. GAIN (red gain) and B.
GAIN (blue gain) appear. You can select each item in the
range from 0 to 255.
OUTDOOR AUTO: This is an auto white balance mode
specifically for outdoors. It allows you to capture images with
natural white balance in the morning and evening.
SVL AUTO: Sodium Vapor Lamp Auto: This is an auto white
balance mode that is compatible with sodium vapor lamps.
SVL: Sodium Vapor Lamp: This is a fixed white balance mode
specifically for sodium vapor lamps.
SVLO AUTO: Sodium Vapor Lamp Outdoor Auto: This is an
auto white balance mode specifically for outdoors, which is
compatible with sodium vapor lamps.

DETAIL Menu

MODE
When you choose AUTO, contour correction signal is automatically added.
When you want to make adjustment by yourself, choose
MANUAL. Only LEVEL will be displayed when you
choose AUTO.
LEVEL: You can set the volume of the contour
correction signal. Choose a value from 0 to 15. The
greater the value, the stronger the contour correction
signal.
BANDWIDTH: You can set the bandwidth for signals
undergoing contour emphasis. You can choose from
DEFAULT, LOW, MIDDLE, HIGH, and WIDE. For example, when you choose MIDDLE, the middle range of the
signals is elevated, and contours in that middle range
are emphasized.
CRISPENING: You can choose the fineness of the
objects subject to contour correction with contour
correction signals.
Choose a value from 0 to 7. When you choose a higher
value, minute contour correction signal elements are
removed, and only the high level contour correction
signals are left, which reduces noise. When you choose
a lower value, minute contour correction signal
elements are added to the picture, increasing noise.
WHITE BALANCE MENU
OSD
EXPOSURE
WHITE BALANCE
>DETAIL
>PICTURE
GAMMA
NETWORK
PAN TILT ZOOM
>SYSTEM
OSD
EXPOSURE
WHITE BALANCE
>DETAIL
>PICTURE
GAMMA
NETWORK
PAN TILT ZOOM
>SYSTEM
42
WB MODE OPW
WHITE BALANCE MENU
WB MODE USER
R GAIN 188
B GAIN 167
WHITE BALANCE MENU
WB MODE OUTDOOR AUTO
WHITE BALANCE MENU
WB MODE SVL AUTO
WHITE BALANCE MENU
WB MODE SVL
WHITE BALANCE MENU
WB MODE SVL OUTDOOR A.
DETALL MENU
DETAIL MODE AUTO
LEVEL 3
DETALL MENU
DETAIL MODE MANUAL
BANDWIDTH DEFAULT
CRISPENING 0
H/V BALANCE -2
B/W BALANCE TYPE1
LIMIT 3
HIGHLIGHT DETAIL 0
SUPER LOW 0