RS232/422 Connection between the HDBaseT receiver and the controller:
To make the RS232/RS422/RS485 control cable connection between the HDBaseT receiver and the
controller:
Use CAT6 network cable to make the RJ45 connector to connect to the HDBaseT Receiver.
1.
a)
RS232: Make RJ45 connector for HDBaseT Receiver RS232 port as following:
b)
RS422: Make RJ45 connector for HDBaseT Receiver RS422 port as following:
c)
RS485: Make RJ45 connector for HDBaseT Receiver RS485 port as following:
27