Cruise Control Switch - BRP Spyder RT Operator's Manual

SECONDARY CONTROLS
rmo2010-001-031_c
1. Hazard warning switch
Push the button down to turn on the
hazard warning lights.

5) Cruise Control Switch

The cruise control switch is near the
right handgrip.
rmo2010-001-031_d
1. Cruise control switch
The switch is a multifunction switch.
It allows to activate, set and stop the
function of the cruise control.
WARNING
It is not recommended to use
the cruise control when towing
a trailer.
When set, the cruise control allows to
maintain a steady speed while riding
the vehicle. It will increase or reduce
engine speed as necessary.
______________
18
NOTE: The vehicle torque may vary
slightly depending on the road condi-
tions such as the wind, going downhill
or uphill.
The cruise control is designed to be
used for prolonged drives on low traf-
fic highways. Never ride the vehicle
with the cruise control activated in
city streets, winding roads, in adverse
weather or in any circumstances when
you need the throttle control.
Cruise Control Limitations
The cruise control is not an automatic
pilot, it will not drive the vehicle.
The cruise control is not aware of what
is going on the road and it does not
steer or apply the brakes for you.
WARNING
Improper use of the cruise control
can lead the vehicle to a loss of
control.
Setting the Cruise Control
To use the cruise control, the vehicle
speed must be above approximately
40 km (25 mi).
Turn the cruise control to ON by sliding
the cruise control button to the right.
rmo2010-001-031_e
1. Slide button to the right
NOTE: The cruise control status will
show CRUISE ON in the digital display.