Operation - OREC RABBIT RM60W Instruction Manual

WARNING
Remember to read the instruction before the use to understand the operation and work of this product.
S
TARTING THE ENGINE
TIP :
1) Make sure to be seated.
2) Make sure to press the parking brake pedal(=locked) to start engine. If brake pedal is not pressed, safety
switch works and engine cannot be started.
3) Make sure that height of cut lever is in tranport position. In other position, engine cannot be started.
4) Make sure that above 1) ~ 3) procedure is respected when starting the engine.
on
off
Brake stopper
Parking brake pedal
Height of cut lever
Height guideline
Choke
OREC RM60W

OPERATION

1) Open the fuel cock.
2) Stay on the seat.
3) Press the parking brake pedal and lock the brake stopper. If speed
control lever is not in N position, shift it to N position.
4) Adjust the height of cut lever to top(=transport position).
5) Make sure that speed lever is in N position, then pull the choke lever(pull
to close, push to open) if engine is not warm enough.
6) Move the throttle lever to intermediate position between MAX and
MINI(upper position is MAX and lower position is MINI).
12