Operation - OREC LS 280 Owner's Manual

Check the tightening of bolts, referring to the tightening torque chart
The safety was one of our main worry when designing and manufacturing this machine.
Therefore, negligence in the use of the machine should reduce our efforts to nothing. The
prevention strictly depends on the care and on the skill of the user when applying and
maintening the machine.The best safety method remains a careful and skilled user ; we wish
you to be this kind of user.
The user of this machine is responsible for its safe use. He must be a skilled user specially trained for the
use of this machine. Read the safety instructions. This machine has been designed to carry to the goods.
It is not designed for any other operation. It is not designed to transport other tools or materials that might
damage it and cause injuries to the user. It must not be used to carry persons.
Never use the machine without having first carried out all the maintenance operations as
described in the daily maintenance chapter.
Never let children or unskilled persons use the machine. Check that nobody or no object stands
near the machine when at work. They could be hit by the moving parts. Nobody must stand on
the machine except the driver. Never put your hands under moving parts.
Starting of the engine
Engine switch turn to "ON"
•
Turn the fuel cock "ON" (Figure 5).
•
Check the Speed change lever in neutral position. (Figure 6)
•
Set the Choke lever if engine is cold or push throttle lever half if
•
engine is hot.
Pull the starter rope. When the engine has started, push back the
•
choke lever.(Figure 7)
Figure 5
© SAT – 09/2006

OPERATION

It is prohibited to overload !
Do not use the choke when the engine is hot.
DANGER
CAUTION
DANGER
CAUTION
Figure 6
12
Figure 7