OREC RABBIT RM60W Instruction Manual page 21

TIP :
HST oil replacement
First : at 20 hours
Later : at each 200 hours or 1 year whichever comes first
References: (The color of HST oil)
Color
Clean and no changing color.
Clean, but there are some black points.
Milky white
Black
Recommended oil : "VG46" or "SAE10W30".
Oil quantity : 500 ml.
VG46 oil is used when it is shipped from factory. Refill the same type of oil. Never mix different type of oil.
G
REASE LUBRICATION
CAUTION
Refer to position of grease nipple in the figure here below, and grease up at every 30 hours of use. In other part
of machine, lubricate with engine oil(#30). If grease is not properly lubricated, it leads to poor movement of
machine and cause damages. Grease nipple is located in each axle part. Use grease gun to lubricate.
④
⑩ ⑪
OREC RM60W
Smell Status
Good No foreign object
Good Some foreign object
Good Some water.
Bad Oxidated and degrade.
⑤ ⑥
⑫
21
To do
Use as usual
Use after filtering
Change the oil
Change the oil
⑦ ⑧ ⑨
⑬