OREC RABBIT RM60W Instruction Manual page 23

F
UEL FILTER
To fuel cock
E
NGINE COOLING SYSTEM
WARNING
Disassemble each parts after engine is well cooled. After clleaning, do not start engine before all parts are
1)
assembled in original position.
Using the machine with engine cooling system covered by grass leads to cause of overheat. Engine
2)
temperature may rise up and cause fire accident.
Do not place hand over the rotating screen. It leads to injury.
3)
Remove the mad and grass on the screen guard before every use.
4)
Screen guard
Fan cover
E
NGINE EXHAUST SYSTEM
WARNING
Disassemble each parts after engine is well cooled. After clleaning, do not start engine before all parts are
1)
assembled in original position.
Using the machine with engine exhaust system covered by grass leads to cause of overheat. Engine
2)
temperature may rise up and cause fire accident.
Remove the mad and grass from exhaust pipe and muffler cover before every use.
3)
Exhaust pipe
OREC RM60W
It is not possbile to disassemble or clean the fuel filter. Replace it every
To carburetor
season or when it is necessary. Pay attention to direction to insert the
filter. For more information, contact your nearest dealer.
Fuel filter
It is recommended to move up the seat to blow the air to remove grass
1)
and dust. Use of high pressure washer is not recommended which may cause
engine trouble by water.
Also remove grass inside and outside the HST fan cover. If not, HST oil
2)
can be heated up and HST performance cannot be as good as expected.
1) Remove dust and grass around engine exhaust pipe by air blow.
23