Related Manuals for OREC LS360
Summary of Contents for OREC LS360
- Page 1 SETUP INSTRUCTION LS360 OREC CO., LTD. AUGUST 2016...
- Page 2 1) Open the box. 2) Check if following items are in bag. 1 x User Manual 1 x Engine Manual 1 x Machine Parts List 1 x double ended wrench 10x12mm 1 x double ended wrench 14x17mm 1 x double ended wrench 19x22mm 2 x wire band 1 x plug wrench 2 x Handle fix bolt M8*45 2 x flat washer 8 2 x spring washer 8 2 x mini cap nut M8 3) Loosen the knob bolts in the location indicated with a picture. 4) Take the frame pipe on the loading platform slipping the side panel, then, put the panel back and fasten the knob bolt again.
- Page 3 5) Get up the loading platform and fix the platform support bar. 6) Check if the platform support bar is fixed securely. 7) Fix the handle. 8) Lift the handle...
- Page 4 9) Put the handle on the frame as shown on this photo. 10) 11) Fix the handle at the suitable height with the bolt and nut included in the box. The height can be adjusted at 3 positions. 12)
- Page 5 13) The washer and the spring washer should be put in the side of the nut. 14) After fixing with the wrench securely, the handle setting is completed. 15) There is oil in the transmission when the machine is shipped from factory. 16) Open the oil cap and check if the engine oil is between min. and max. level-indicator...
- Page 6 17) Unfasten the platform support bar, then, get down the loading platform. 18) 19) Fix the handle and the wire with the wire band included in the box. Side : L 20) Side : R...
- Page 7 21) Mount the frame pipe on the loading platform. 22) Check the machine once again to see if the setup is correctly finished.