Short Description - AUMA SQ 05.2 Operation Instructions Manual

SQ 05.2 SQ 14.2 / SQR 05.2
AC 01.2 Intrusive Modbus RTU
Data Matrix code
2.2.

Short description

Part-turn actuator
Actuator controls
Local controls/
AUMA software
Intrusive - Non-Intrusive
SQR 14.2 Control unit - electromechanical
When registered as authorised user, you may use our AUMA Assistant App to scan
the Data Matrix code and directly access the order-related product documents without
having to enter order number or serial number.
Figure 6: Link to AUMA Assistant App:
For further Service & Support, software/apps/... refer to www.auma.com.
Definition in compliance with EN 15714-2/EN ISO 5211:
A part-turn actuator is an actuator which transmits a torque to the valve for less than
one full revolution. It need not be capable of withstanding thrust.
AUMA part-turn actuators SQ 05.2
an electric motor. For manual operation, a handwheel is provided. Switching off in
end positions may be either by limit or torque seating. Actuator controls are required
to operate or process the actuator signals.
AC 01.2 actuator controls are used to operate AUMA actuators and are supplied
ready for use. The actuator controls may be mounted directly to the actuator or
separately on a wall bracket.
The functions of the AC 01.2 actuator controls include standard valve control in
OPEN-CLOSE duty, positioning, process control, logging of operating data, diagnostic
functions right through control via various interfaces (e.g. Fieldbus, Ethernet and
HART).
Operation, setting, and display can be either performed directly at actuator controls
or alternatively from Remote via binary input signals, or using another interface.
The following options are available at the actuator controls in local operation:
The actuator can be operated via the push buttons of the local controls or set-
tings can be made in the actuator controls menu.The display shows information
on the actuator as well as menu settings (contents of these instructions).
Using the AUMA CDT software for Windows-based notebooks or the AUMA
Assistant App for Android-based devices, data can be uploaded and read
whereas settings can be modified and stored.The connection between computer
and actuator controls is wireless via Bluetooth interface (not included in these
instructions). AUMA CDT software can be downloaded free of charge from our
website www.auma.com.
Intrusive version (control unit: electromechanical):
Limit and torque setting is performed via switches in the actuator.
Non-Intrusive version (control unit: electronic):
Limit and torque setting is performed via the controls, without removal of actu-
ator or actuator controls covers. For this purpose, the actuator is equipped with
an MWG (magnetic limit and torque transmitter), also capable to supply analogue
torque feedback signals/torque indication and analogue position feedback sig-
nals/position indication at the actuator controls output.
SQ 14.2/SQR 05.2 SQR 14.2 are driven by
Identification
11