AUMA SQ 05.2 Operation Instructions Manual page 72

Corrective action
72
SQ 05.2 SQ 14.2 / SQR 05.2
The motor has to cool down before operation can be resumed.
Depending on the parameter setting (motor protection behaviour), the fault signal is
either automatically reset or the fault signal has to be acknowledged.
The acknowledgement is made:
in selector switch position Local control (LOCAL) via push button RESET.
In selector switch position Remote control (REMOTE) with Reset command
via fieldbus.
SQR 14.2 Control unit - electromechanical
AC 01.2 Intrusive Modbus RTU