Short Description - AUMA AMB 01.1 Manual

Identification
AUMA power class for
switchgear
Control
Data Matrix code
2.2.

Short description

Part-turn actuator
Actuator controls
Local controls
10
The switchgear used in the actuator controls (reversing contactors/thyristors) are
classified according to AUMA power classes (e.g. A1, B1, ....). The power class
defines the max. permissible rated power (of the motor) the switchgear has been
designed for. The rated power (nominal power) of the actuator motor is indicated in
kW on the motor name plate. For the assignment of the AUMA power classes to the
nominal power of the motor types, refer to the separate electrical data sheets.
For switchgear without assignment to any power classes, the actuator controls name
plate does not indicate the power class but the max. rated power in kW.
Table 2: Control examples (indications on controls name plate)
Input signal Description
24 V DC Control voltage 24 V DC for OPEN-CLOSE control via digital inputs
(OPEN, STOP, CLOSE)
115 V AC Control voltage 115 V AC for OPEN-CLOSE control via digital inputs
(OPEN, STOP, CLOSE)
230 V AC Control voltage 230 V AC OPEN - CLOSE control via digital inputs
(OPEN, STOP, CLOSE)
When registered as authorised user, you may use the AUMA Support App to scan
the Data Matrix code and directly access the order-related product documents without
having to enter order number of serial number.
Figure 5: Link to the App store:
Definition in compliance with EN ISO 5211:
A part-turn actuator is an actuator which transmits a torque to the valve for less than
one full revolution. It need not be capable of withstanding thrust.
AUMA part-turn actuators are driven by an electric motor. A handwheel is provided
for manual operation. Switching off in end positions may be either by limit or torque
seating. Controls are required to operate or process the actuator signals.
The AUMA MATIC actuator controls are used to operate AUMA actuators and are
supplied ready for use. The controls can be mounted directly to the actuator but also
separately on a wall bracket. The electro-mechanical version of the AUMA MATIC
controls includes switchgear for control in OPEN - CLOSE duty and a logic for various
indications via contacts
Operation (via push buttons), setting and indication can be performed directly at the
controls (contents of these instructions).
SQ 05.2 SQ 14.2/SQR 05.2 SQR 14.2
AMB 01.1