Quick Sync indicator codes
Figure 12. Quick Sync
1. Quick Sync Status Indicator
2. Quick Sync Activation Button
Table 13. Quick Sync indicator codes
Quick Sync indicator
pattern
Slow blink
Solid
Blinks three times rapidly
and then turns off
Blinks continuously when
the mobile device
touches antenna
Blinks rapidly
continuously when the
activation button is
pressed
Turns off
Locating service tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code is and Service
Tag are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on
the chassis of the system. This information is used by Dell to route support calls to the appropriate personnel.
24
Dell PowerEdge R730 system overview
Condition
Quick Sync is waiting to be configured from iDRAC.
Quick Sync is ready to transfer.
Quick Sync feature is disabled from iDRAC.
Indicates data transfer activity.
Quick Sync hardware is not responding properly.
Indicates that the Quick Sync feature is turned off. Use the activation button to activate it. If
pressing the activation button does not turn on the LEDs, it indicates that power is not delivered to
the Quick Sync bezel.