Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell PowerEdge E31S Series Owner's Manual

Figure 83. Installing the TPM
1. rivet slot on the system board
3. TPM
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 66
Related tasks
Before working inside your system
Installing the system board
After working inside your system

Initializing the TPM for BitLocker users

Steps
Initialize the TPM.
For more information about initializing the TPM, see https://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Initializing the TPM for TXT users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9. From the Intel TXT option, select On.
148 Installing and removing system components
on page 67
on page 144
on page 67
2. plastic rivet
4. TPM connector