Installing A 2.5-Inch Hard Drive Blank - Dell PowerEdge E31S Series Owner's Manual

Figure 84. Removing a 2.5-inch hard drive blank
a. hard drive blank
b. release button
Related references
Safety instructions on page 66
Related tasks
Removing the optional front bezel

Installing a 2.5-inch hard drive blank

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 85. Installing a 2.5-inch hard drive blank
a. hard drive blank
Next steps
If removed, install the front bezel.
Related references
Safety instructions on page 66
150 Installing and removing system components
on page 68