Installing The Cooling Fan Assembly - Dell PowerEdge E31S Series Owner's Manual

Figure 24. Removing the cooling fan assembly
1. cooling fan assembly
3. release lever (2)
5. cooling fan connector (6)
Next steps
1. Install the cooling fan assembly.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 66
Related tasks
Before working inside your system

Installing the cooling fan assembly

After working inside your system
Installing the cooling fan assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
78 Installing and removing system components
on page 67
on page 78
on page 67
2. cooling fan (6)
4. guide pin on the system board (2)
6. guide pin on the chassis (6)