Dell PowerEdge E31S Series Owner's Manual page 92

Figure 32. Removing a processor
1. close first socket-release lever
3. processor
5. processor shield
7. socket
Next steps
1. Replace the processor(s).
2. Install the heat sink.
3. Reinstall the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 66
Related tasks
Before working inside your system
Removing an expansion card from expansion card riser 2 or 3
Removing the cooling shroud
Removing a heat sink on page 88
Installing a processor on page 93
Installing a heat sink on page 94
Installing the cooling shroud
Installing an expansion card into the expansion card riser 2 or 3
After working inside your system
92 Installing and removing system components
on page 67
on page 74
on page 75
on page 67
2. pin-1 indicator of processor
4. slot (4)
6. open first socket-release lever
8. socket keys (4)
on page 106
on page 108