Opening And Closing The Pcie Card Holder Latch - Dell PowerEdge E31S Series Owner's Manual

Opening and closing the PCIe card holder latch

Prerequisites
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
Steps
1. To open the PCIe card holder latch, press the release tab.
2. To close the PCIe card holder latch, rotate the latch clockwise until it locks.
NOTE: Before installing a full-length PCIe card, the PCIe card holder latch must be closed. When the full-length PCIe
card is installed, open the PCIe card holder latch. Before removing the full-length PCIe card, you must close the PCIe
card holder latch.
Figure 39. Opening the PCIe card holder latch
a. PCIe card holder
b. release tab
c. PCIe card holder latch
Figure 40. Closing the PCIe card holder latch
a. PCIe card holder
b. release tab
c. PCIe card holder latch
Next steps
Follow the procedure listed in the After working inside your system section.
Installing and removing system components 99