Table of Contents
Advertisement
2
Basic Operation
The ZyPerMX4/MX2 features the Maestro web interface. Maestro allows you to control and
manage all features of the ZyPerMX4/MX2. To access Maestro, open a web browser and enter
the IP address of the ZyPerMX4/MX2 into the address bar. We recommend using Firefox or
Chrome browsers.
1.
Make sure that the computer used to access Maestro and the ZyPerMX4/MX2 encoder are
on the same network. If a network is not being used, the ZyPerMX4/MX2 can be directly
connected to the computer. In both cases, the ZyPerMX4/MX2 and the computer must be
on the same subnet.
2.
Launch the web browser and enter the IP address of the ZyPerMX4/MX2 in
the address bar. (IP address can be found on LED display of ZyPerMX4/MX2)
3.
The Maestro interface will be displayed with the password dialog.
4.
Enter the password. The default password is admin and is case-sensitive.
5.
Click the Log In button.
The Maestro Web Interface
Logging In
3
Advertisement
Table of Contents
Need help?
Do you have a question about the ZyPerMX2 and is the answer not in the manual?
Questions and answers