The ZyPerMX4/MX2 has the ability to remotely control/manage DirecTV H.25 set top
boxes.
Important:
fields found in this tab.
1.
Click on the STB tab
2.
Enter the IP address of the H.25 into the STB IP field.
the IP addresses of the connected set top boxes through the boxes themselves and
through Maestro, information from each managed unit such as power status (on/off),
current channel, and program information is pulled into the STB tab.
This information updates approximately every 5-10 seconds.
DirecTV H.25 Set Top Box Control
If you do not have a DirecTV H.25 please do not make changes to any
STB Tab
28
Basic Operation
Once you have programmed
Need help?
Do you have a question about the ZyPerMX2 and is the answer not in the manual?