Resetting The Zypermx4 - ZeeVee ZyPerMX2 User Manual

The ZyPerMX4/MX2 can be reset to factory-default settings by clicking the Default button
under the Device tab or by pressing the NAV / Control button on the unit. (See next page
for details) When the ZyPerMX4 is reset to factory-default settings, the IP address will be
reset to will be set to DHCP mode.
► Using Maestro
1. Login to the Maestro web interface. See
more information.
2. Click the Device tab.
3. Click the Default button, under Actions.
4. The following dialog will be displayed, prompting to confirm the reset procedure.
5. Click the Reset button to reset the ZyPerMX4/MX2 to factory-default settings. Click
the Cancel button to return to the Device tab.

Resetting the ZyPerMX4

The Maestro Web Interface (page 3)
23
Basic Operation
for