Switch Configuration Options - ZeeVee ZyPerMX2 User Manual

Some Switches will work directly out of the box with zero configuration required. Nearly all
switches however will provide the user some ability to customize the configuration. The list
below includes various switch configuration options that ZeeVee has encountered. Look for
these or similar options when configuring your switch.
1. Enable IGMP Snooping
2. Enable IGMP Snooping on VLAN used by ZyPerMX2/4
3. Filter/Drop unregistered Multicast traffic
4. Unregistered Multicast Flooding
5. Filter Unregistered Multicast (different wording than number 4 above)
6. Disable IGMP Query
7. Disable IGMP Query on VLAN used by ZyPerMX2/4
8. Validate IGMP IP Header
9. Set IGMP Version to IGMP V2
10. Enable FASTLEAVE on port X
11. Enable FASTLEAVE for VLAN used by ZyPerMX2/4

Switch Configuration Options

a.Must be enabled
a.Must be enabled when all ports default to VLAN1
a. If not applied, the behavior of the switch will be to broadcast
multicast packets if the switch has no known destination for
that packet.
b. Must be enabled if found
a.Must be disabled if found
a.Must be enabled if found
a. Must be disabled if found
a. Must be set if found
a. Should be enabled, if found
a. Should be enabled if found
37
Basic Operation