ZeeVee ZyPerMX2 User Manual page 9

5. Locate the IP Type field:
► If this field is set to DHCP, then all network parameters are assigned
automatically, providing there is a DHCP server connected to the network.
► If the IP Type is set to Static, then follow steps 6 - 9.
6. Enter the IP address in the IP Address field. When a value is changed to valid address, the
box will highlight in green. Note this is the Primary IP address for the ZyPerMX4.
7. Enter the subnet mask in the Mask field.
8. Enter the gateway address in the Gateway field.
9. Repeat the procedure for AV Port 3 & 4. (ZyPerMX4 only) Click the Apply button to com-
mit the changes. To discard recent changes, click the Reset button. Note that a reboot of
the unit is required for these changes to take effect.
5
Basic Operation