Table of Contents
Advertisement
Using a Phillips Head Screwdriver (sold separately) tighten
7.
the Screws, being careful not to over-tighten.
Note: Do not over-tighten the Screws. If you encounter re-
sistance while you're tightening the Screws, stop tightening.
Failure to do so could result in damage to the monitor.
Repeat steps 1 - 6 to mount the second Monitor.
8.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the VESA Mount
27
Advertisement
Table of Contents
Need help?
Do you have a question about the ARMDUAL2 and is the answer not in the manual?