StarTech.com ARMDUAL2 User Manual page 19

Slide the Cable Management Clips onto of the pole.
2.
- or -
Clip the Cable Management Clip onto the Pole.
Align the three Screw Holes on the top of the C-Clamp with
3.
the three Screw Holes on the bottom of the Pole.
Using a Phillips Head Screw Driver, remove the small screw
4.
attached to the Knob onto the C-Clamp.
Remove the backing from the Rubber Pads (x 5).
5.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing Cable Management Clip
Removing the Knob
18