Main Operational Display (Home)
This is the Circulators main operational display. You can return to this screen at any time by pressing the
key.
Lit when heating
Lit when refrigerating
(Refrigerating/Heating
models only)
Lit when circulating
bath fluid
Set-Up Sub-Menus
Pressing the
key accesses the Temperature Controller's set-up sub-menus. The Touch Scroll Bar is
used to change the current setting / value in the sub-menus.
Sub-Menu
Temperature unit
Pump Speed
Calibration
Low Limit
High Limit
Baud
Refrigeration Control
(Refrigerating / Heating
Circulators only)
To accept a value in a sub-menu, press
operational display ( approximately 10 seconds).
110-512 BEL/EN
Selection / Range
°C or °F
Low or High
-3.0°C to +3.0°C
-52° to 20°C / -65° to +65°F
+25° to +175°C / +80° to +350°F
1200, 2400, 4800, 9600, 19200, 38400, 57600
1 to 150°C
,
,
, or allow the LCD to return to the main
Actual bath
temperature
Set point
temperature
Factory Default
°C
High
0.0°C
-52°C
175°C
9600
45°C
23