Table of Contents
Advertisement
Quick-Start
Unless otherwise specified, quick-start instructions apply to all models.
See Installation and Startup for additional information.
1
Fill reservoir with fluid
Models TC-150 and TC-250:
Connect cooling coils to external
2
water line
(Use of cooling coils is optional)
Connect all electrical power cords
3
and control cables
110-512 BEL/EN
IEC power cord
from Controller to
Refrigeration
Power Module
Maximum: 1 in. / 2.54 cm
below underside of top
deck
Minimum: 4.5 in. / 11.5 cm
below top deck
Heating only models
Refrigerating / heating
models
Refrigeration
control cable
14
Advertisement
Table of Contents
Troubleshooting
