Selecting The Pump Speed - Ametek BrookField TC Series Operator's Manual

Selecting the Pump Speed

This sub-menu allows you to select your Circulator's pump speed. The choices are Low (LO) and
High (HI); the factory default is High (HI).
To Access: Press the
To Change: To select the high pump speed, touch the top arrow; to select the low pump
speed, touch the bottom arrow.
To Accept: Press
display (approximately 10 seconds).
110-512 BEL/EN
key until PUMP appears on the display.
, , or allow the LCD to return to the main operational
,
Touch top arrow to select
High
Touch bottom arrow to select
Low
26