Yardistry YM11700 Installation And Operating Instructions Manual page 35

Step 15: Attach Trellis End Assemblies
Part 2
D: Starting at the centre Trellis End Assembly and working outwards attach four Trellis End Assemblies on either
side alternating each Trellis End Assembly so the Trellis Clip is on opposing sides to the assemblies next to it.
(fig. 15.5)
Note: The distance between assemblies should be 12" (fig. 15.6)
Note: Refer to previous page, fig 15.2 and 15.3 for attaching trellis clip.
Fig. 15.5
8X
12
Fig. 15.6
8X
12
Start here and move
outwards on either
side alternating trellis
assemblies so Trellis Clip
varies from side to side.
35
Hardware
40 x #10 x 4" Wood Screw
16 x #10 x 1-1/4" Pan Screw
support@yardistrystructures.com