Yardistry YM11700 Installation And Operating Instructions Manual page 21

Step 6: Attach Plinths to Corner Post Assembly
Part 3
C: Place one (032) End Plinth Assembly onto each Corner Post Assembly. Line them up with previously placed
Plinths. Make sure they are flush and tight to each other and then fasten with two #6 x 30 mm Trim Screw per
end. (Fig. 6.5 and 6.6)
Fig. 6.5
(032) End
Plinth
Assembly
#6 x 30 mm
Trim Screw
x 2 per board
Wood Parts
8 x (032) End Plinth Assembly 34.9 x 152.4 x 141.3 mm
Flush
#6 x 30 mm
Trim Screw
Note: Loosen screws as
necessary to align all edges.
16 x #6 x 30 mm Trim Screw
21
Fig. 6.6
(032) End
Plinth
Assembly
Hardware
support@yardistrystructures.com