Yardistry YM11700 Installation And Operating Instructions Manual page 19

Step 6: Attach Plinths to Corner Post Assembly
Part 1
A: Place one (034) Short Plinth B Assembly with one (035) Short Plinth A Assembly tight to each other and
attach using two #6 x 30 mm Trim Screw at the opposite corners per Plinth. (Fig. 6.1 and 6.2)
Note: Plinths will be attached to four corners.
Plinths rest on top of the L Mounts
Wood Parts
4 x (035) Short Plinth A Assembly 34.9 x 152.4 x 492.1 mm
4 x (034) Short Plinth B Assembly 34.9 x 152.4 x 492.1 mm
Fig. 6.1
Flush to corners
(034) Short Plinth
B Assembly
#6 x 30 mm
Trim Screw
19
Fig. 6.2
(035) Short Plinth
A Assembly
Hardware
16 x #6 x 30 mm Trim Screw
support@yardistrystructures.com