Yardistry YM11700 Installation And Operating Instructions Manual page 33

Step 14: Assemble Trellis Ends
A: On a flat and level surface, fit together one (233) Trellis End Short and one (232) Trellis End Long.
(fig. 14.1)
B: Place one Trellis Clip over the joined ends and attach with one 1/4 x 2" Hex Bolt (with two 1/4" flat washer and
1/4" lock nut).
(fig. 14.2)
C: Repeat Steps A and B until there are 9 Trellis End Assemblies.
Fig. 14.1
Fig. 14.2
1/4" Flat
Washer
Wood Parts
9 x (232) Trellis End Long 38.1 x 63.5 x 2554.8 mm
9 x (233) Trellis End Short 38.1 x 63.5 x 1699.7 mm
(232) Trellis
End Long
(232) Trellis
End Long
Trellis Clip
1/4 x 2"
Hex Bolt
1/4" Flat
Washer
1/4" Lock
Nut
(233) Trellis
End Short
9 x Trellis Clip
9 x 1/4 x 2" Hex Bolt (1/4"flat washer x 2, 1/4"
lock nut)
33
(233) Trellis
End Short
Hardware
support@yardistrystructures.com