Yardistry YM11700 Installation And Operating Instructions Manual page 18

Step 5: Attach L - Mount Brackets
A: Pre-drill with a 1/8" drill bit and attach two L Mounts (one L Mount Right and one L Mount Left) flush to the
inside edge, at the bottom of each Panel Post with two #10 x 1-1/4" Pan Screw per L Mount as shown in fig.
5.1, 5.2 and 5.3.
Note orientation of tabs.
Flush to bottom of posts
Fig. 5.1
#10 x 1-1/4"
x 2 per L Mount
Pan Screw
L Mount Right
L Mount Left
Fig. 5.3
L Mount Right
L Mount Left
18
Note: Flush to the inside edge.
L Mount Left
Fig. 5.2
L Mount Right
Hardware
16 x Room L-Mount (Right and Left)
32 x #10 x 1-1/4" Pan Screw
support@yardistrystructures.com