Advertisement
Step 3: Assemble 8 Panels
Part 1
Note: You will be assembling 8 Panel Post Assemblies in
total in Step 3.
A: Lay one (241) Engineered Panel Post Long and one (239)
Engineered Panel Corner Post Long on edge so the grooved
sides face each other, on a level surface.
B: Place one (191) Bottom Brace Insert in between the posts
tight to the bottom ledge and attach with two #8 x 3" Wood
Screws as shown in fig. 3.1.
C: Set one (185) Horizontal Insert between the posts and
tight to Bottom Brace Insert. Attach with two #8 x 3" Wood
Screw as shown in figure 3.1.
Wood Parts
8 x (241) Engineered Panel Post Long 36 x 69.9 x 2463.8 mm
8 x (191) Bottom Brace Insert 38.1 x 69.9 x 409.6 mm
8 x (185) Horizontal Insert 38.1 x 38.1 x 409.6 mm
8 x (239) Engineered Panel Corner Post Long 53.5 x 69.9 x 2463.8 mm
Fig. 3.1
#8 x 3" Wood
Screws
Tight to
bottom
ledge on
both posts
(191) Bottom
Brace Insert
14
(241)
Engineered
Panel Post
Long
Top
(239) Engineered
Panel Corner Post
Long
(185) Horizontal Insert
#8 x 3" Wood
Screws
Bottom
Hardware
32 x #8 x 3" Wood Screw
support@yardistrystructures.com
Advertisement
