Advertisement
Step 10: Attach Arch Beam Fronts
It is important the proper hardware gets
placed in the places shown. Make sure
you install the Hex Bolts first and then the
wood screws.
A:
Attach one (195) Arch Beam Front in
between two Corner Post Assemblies as
shown in fig. 10.2 and attach to Corner Post
Assembly with one 5/16 x 5" Hex Bolt (with
5/16" flat washer, 5/16" lock washer and 5/16
t-nut); and one 5/16 x 4 1/2" Hex Bolt (with
5/16" flat washer, 5/16" lock washer and 5/16"
t-nut) per side. (fig. 10.1)
B: Attach three #8 x 3" wood screws
per side.
C: Repeat for the opposite side.
Fig. 10.2
(195) Arch
Beam Front
Wood Parts
2 x (195) Arch Beam Front 38.1 x 241.3 x 3048 mm (2 x 6 x 120")
Fig. 10.1
#8 x 3"
Wood
Screw
5/16 x 5"
Hex Bolt
5/16" Lock
Washer
(195) Arch
Beam Front
12 x #8 x 3" Wood Screw
4 x 5/16 x 4-1/2" Hex Bolt (5/16" flat washer, 5/16" lock washer, 5/16" t-nut)
4 x 5/16 x 5" Hex Bolt (5/16" flat washer, 5/16" lock washer, 5/16" t-nut)
26
Corner of
Corner Post
Assembly
5/16" Flat
Washer
5/16 x 4 1/2"
Hex Bolt
#8 x 3"
Wood
5/16"
Screw
Lock
Washer
Hardware
support@yardistrystructures.com
5/16" t-nut
(195) Arch
Beam Front
5/16" Flat
Washer
Outside
Panel Post
Advertisement
