Yardistry YM11700 Installation And Operating Instructions Manual page 30

Step 13: Attach Support Beams
Part 1
A: Leaving the T-nut installed, remove the 5/16 x 6"
Hex Bolt (5/16" lock washer and 5/16" flat washer) from
each Beam End Assembly installed in Step 9. (fig. 13.1
& 13.2)
Fig. 13.2
(234) Beam
105 1/2"
Step 10a
Fig. 13.1
Beam End
Assembly
5/16 x 6" Hex Bolt
Remove Hex Blt, Lk Washer, Flat Washer from Step 6
(Leave T-Nut Installed)
5/16 x 6" Hex Bolt
(lock washer and
flat washer)
30
support@yardistrystructures.com