Enable Usb Device Wake-Up Function (Jusb); Fwh Protection Jumper (Jav) - QDI WinneX3E Manual

Installation Instruc tions

Enable USB Device Wake-up Function (JUSB)

The mainboard provides the advanced USB device w ake-up function. The sy stem can be
w aken up from its pow er saving including ACPI S3 by activating USB device. Before using
this function, set JUSB w ith pin1 & pin2 closed. Otherw is e, set JUSB w ith pin2 & pin3
closed for disabling.

FWH Protection Jumper (JAV)

The BIOS of the mainboard is inside the FWH. If the jumper JAV is set as closed, you w ill
be unable to flash the BIOS to the mainboard. How ever in this status, the system BIOS is
protec ted from being attacked by serious virus such as CIH virus.
Setting the jumper JAV as open (default), meanw hile disabling the "Flash Write Protect" item
in AWARD BIOS CMOS Setup, allow s you to flash the BIOS to the flash ROM in FWH.
The DMI (Desktop Management Interface) system information such as the CPU type/speed,
memory size, and expansion cards w ill be detected by the onboard BIOS and stored in the
flash ROM in FWH. Whenever the system hardw are configuration is changed, DMI informa-
tion w ill be updated automatically. How ever, setting jumper JAV as closed makes flashing
BIOS and updating DMI information impossible.
Refer to page 4 for the tw o choices to implement FWH Protection function.
Disable:
Enable:
Flash Write Disabled
Flash Write Enabled
Manual for WinneX 3E
JUSB
JUSB
JAV
JAV