Line-In Jack, Microphone-In Jack, Speaker-Out Jack And Midi/Joystick Connector; Atx Pow Er Supply Connector & Pow Er Sw Itch - QDI WinneX3E Manual

Installation Instruc tions
The s erial port UART2 is not available on the back panel. Therefore, w e provide a 9-pin
ribbon cable w ith bracket for UART2 port. (manufacturing option)
UART2
Line-in Jack, Microphone-in Jack, Speaker-out Jack and
MIDI/Joystick Connector
The Line-in jack can be connec ted to devices such as a c assette or minidisc player for
playback or recording. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker -out jack allow s you to connect speakers or headphones f or audio
output from the internal amplifier.
The MIDI/Joystick connector allow s you to connect a game joystick or a MIDI device.
MIDI/Joy stick
Speaker out
Microphone in
Line in
ATX Power Supply Connector & Power Switch (POWER)
Be sure to connect the pow er supply plug to this connector in its proper orientation. The
pow er sw itch (POWER) should be connected to a momentary sw itch. When pow ering up
your system, first turn on the mechanical sw itch of the pow er supply (if one is provided),
then push once the pow er sw itch. When pow ering off the system, you needn't turn off the
*
mechanical sw itch, just Push once the pow er sw itch.
ATX Power Supply Connector
20
1
Manual for WinneX 3E