QDI WinneX3E Manual page 49

Note:
a. During the process of partition backup or recovery, a guage w ill be show n as
below, the backup or recovery speed is about 4-5Mbyte/s. See figure-4.
b. If a disk I/O error occurs during the process of partition backup or recovery, this
means there's physical damage on the hard disk, how ever users can ignore it
and continue the process.
2.3 ATTRIB PAR
Function : Allow s users to modify the properties of the partition (eg. FAT16 ->
FAT32) after entering OS.
Lim itation : None.
Steps : After pressing this button, turn on/off the sw itch.
Note:
a. The sw itch resets to the default setting "disable" every time the system reboots.
b. In order to implement this function, users need to enable the sw itch w hen ins tall-
ing the OS or modifying the partition properties. Please note: Do not create or delete
partitions or change the partition size w hen modifying the partition properties.
2.4 BACKUP CMS
Function : Backups all CMOS settings.
Lim itation : None.
Steps : After choosing this function, the current CMOS settings w ill be saved.
2.5 RE-CVR CMS
Function : Recovers all CMOS settings.
Lim itation : None.
Steps : After choosing this function, the latest backup of the CMOS settings
w ill be recovered. The system needs reboot in order to validate the
new CMOS settings.
Note : If users have never backuped the CMOS settings, a w rong message
w ill be show n after choosing this function.
figure- 4 Backup Par tition
Manual for WinneX 3E
WinneX 3E