QDI WinneX3E Manual page 47

1.3 ACTIVE PAR
Function : Implements multi-boot function by activating one of the partitions.
Lim itation : When no partition exists, this button is disabled.
Steps : If there're tw o or more partitions, choose one of them by pressing F5
key.
Note : After setting active partition, a letter "A" w ill be show n in front of this
partition.
1.4 CREATE MIR
Function : Adds mirror partition for the disk partition that has no mirror.
Lim itation : This function should be performed by order, for example, from partition
1 to 4. If no disk space remains or the last partition has its mirror
partition already, this button is disabled.
Steps : After pressing the "CREATE MIR" button, use F5 key to choose the
partition to create mirror. The partition of w hich the size is bigger than
the left disk space w ill be ignored.
1.5 DELETE MIR
Function : Deletes the mirror partition.
Lim itation : If there is no mirror partition, this button is disabled. This function
should be performed in reverse order, for example, from partition 4 to 1.
Steps : After pressing the "DELETE MIR" button, only the final mirror partition
can be deleted in order to keep the continuous disk space. If the
w arning message is confirmed, the mirror partition w ill be deleted. By
pressing "N" or "ESC" key,the system quits.
1.6 UNINST SFW
Function : Uninstall RecoveryEasy.
Lim itation : None.
Steps : After pressing the "UNINST SFW" button and the w arning message is
confirmed, RecoveryEasy w ill be uninstalled. By answ ering "N", the
system quits.
Note : After RecoveryEasy is uninstalled, all the mirror areas have been
disconnected w ith the relate partitions. If no partition is deleted or
changed in size, or no other partition is created, users have chance to
"Recover existing RecoveryEasy settings" w hen next time entering
RecoveryEasy partition interface, meanw hile the passw ord w ill be set
as default setting "qdiqdi".
1.7 OTHERS
F12 : Sw itches to Recovery User Interface.
ESC : Exits from the Parti t ion User Interface. If users made some mistakes, for
example, w rongly delete a partition, do not press the "ESC" key, press the
reset button on your system at once, in this way users can save their system.
Manual for WinneX 3E
WinneX 3E